Sharp200 Pro+ 600 VA Introducing our LED display UPS with microprocessor control, voltage stabilization, and intelligent battery management. It ensures uninterrupted power by auto-restarting during outages, protects against overloads and surges, and offers optional USB ports. Trust in reliable power protection.
Get Your Quote Now! Download the PDF here
Sharp200 Pro+ 600 VA:
LED display
Microprocessor-based digital control
Boost and buck AVR for voltage stabilization
Auto sensing frequency
Wide input voltage range
Power-on self test
Cold start
Auto restart when mains power is restored
Auto track mains phase to ensure that inverter output voltage has same phase with utility voltage, reducing transfer time and peak surge
Intelligent battery management: battery temperature compensation to extend the battery life; three-stage charging to shorten recharge time
Short circuit, battery overcharge / overdischarge, overload, surge protections
Automatic charging in OFF mode
Optional no-load shutdown
Optional USB ports
Unattended safety shutdown: system alarm and auto Power-On / Off by USB interface communicating with PC
Model
SHARP260 Pro+
Capacity
600VA/360W
Input
Voltage range
100 / 110 / 120 Vac: 80 – 150 Vac;
220 / 230 / 240 Vac: 162 – 295 Vac or 145 – 295 Vac
Frequency range
50 / 60 Hz (auto-sensing)
Output
Output voltage (battery mode)
100 / 110 / 120 Vac ± 10% or 220 / 230 / 240 Vac ± 10%
Output frequency (battery mode)
60 Hz / 50 Hz ± 1% (auto-sensing)
Waveform
Mains mode: pure sine wave; Battery mode: simulated sine wave
Switching time
2 – 8 ms (typical), 12 ms (max.)
Batteries
DC voltage
12V
Model & numbers
12V/7Ah×1
Recharge time
6 ~ 8 h
Indicators
LED display
AC mode, Battery mode, Battery charge state
Protection
Full protection
Short circuit, battery overcharge, over discharge, overload, surge protections
Operating environment
Operating temperature
0 – 40℃
Relative humidity
5 – 90%
Physical
Dimensions(W×D×H)(mm)
175×255×93
Packaged Dimensions (W×D×H)(mm)
224×332×130
Net/Gross weight (kg)
4.2/4.5